comercial@angodos.com +34 916 154 167
AG1 WAFER BUTTERFLY VALVE
ANGODOS AG1 WAFER
ANGODOS AG1 WAFER is a full bore butterfly valve with wafer connection body
ANGODOS AG1 WAFER is a full bore butterfly valve with wafer connection body. The valve is available from DN40 to DN260 and for a máximum pressure of PN40. The sealing gasket is the key for reliable sealing performance and it’s placed in the body. The disc is attached to the eccentric (simple or double) shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG1 sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic features minimizing the head loss.
PRODUCT FEATURES.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Easy elastomers replacement.
- Flat lateral gaskets included, body embedded for easy installation.
- Wafer connection.
- Face to face dimensions series 16 according to UNE-EN 558.
- Simple or double eccentricity.
- Low friction and maintenance free bearing system.
- Locking system on the shaft, no need to cut off the fluid flow for gearbox maintenance works (optional).
- Gearbox: smooth drive, IP67 rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Easy installation due to the lifting attachments and compact size.
- Wide manufacture range from DN40 to DN600 / PN10, PN16, PN25, PN40.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Special materials available upon request.
- Other dimensions available upon request.
- Sea water available.
|
|
|
PRODUCT FEATURES
BUTTERFLY VALVE WITH DISMANTLING JOINT AG1-CT
ANGODOS AG1-CT
ANGODOS AG1-CT is a full bore butterfly valve with flanged body and incorporated dismantling joint
ANGODOS AG1-CT is a full bore butterfly valve with flanged body and incorporated dismantling joint. The valve is available from DN300 to DN2000, for PN10, PN16 and PN25. The body is made of two elements. A fixed part made of welded steel, and a mobile part which allows to change the face to face dimensions, avoiding the need of installing an additional dismantling joint The sealing gasket is the key for reliable sealing performance and it’s placed in the fixed part of the body. The disc is attached to the eccentric (simple or double) shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG1-CT sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic.
PRODUCT FEATURES.
- Incorporates a dismantling joint.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Easy elastomers replacement.
- Flat lateral gaskets included, body embedded for easy installation.
- Flange connection according to UNE-EN 1092.
- Face to face dimensions series 13 and 14 according to UNE-EN 558 but it is adjustable.
- Simple or double eccentricity.
- Low friction and maintenance free bearing system.
- Locking system on the shaft, no need to cut off the fluid flow for gearbox maintenance works (optional).
- Gearbox: smooth drive, IP67rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Easy installation due to the lifting attachments and compact size.
- Wide manufacture range, DN300-DN2000 / PN10, PN16, PN25.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Special materials available upon request.
|
|
|
AG1-BC BUTTERFLY VALVE
ANGODOS AG1-BC
ANGODOS AG1-BC is a full bore butterfly valve with flanged body
ANGODOS AG1-BC is a full bore butterfly valve with flanged body. The valve is manufactured from a single cast iron body (up to DN1600) or mechanical welded body (from DN700 to DN2000). The sealing gasket is the key for reliable sealing performance and it’s placed in the body. The disc is attached to the eccentric (simple or double) shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG1-BC sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic features minimizing the head loss.
PRODUCT FEATURES.
- UNE-EN 1074-1 / UNE-EN 1074-2 Product certificate.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Easy elastomers replacement.
- Flat lateral gaskets included, body embedded for easy installation.
- Flange connection according to UNE-EN 1092.
- Face to face dimensions series 13 and 14 according to UNE-EN 558.
- Simple or double eccentricity.
- Low friction and maintenance free bearing system.
- Locking system on the shaft, no need to cut off the fluid flow for gearbox maintenance works (optional).
- Gearbox: smooth drive, IP67rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Easy installation due to the lifting attachments and compact size.
- Wide manufacture range, DN200-DN2000 / PN10, PN16, PN25.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Special materials available upon request.
- Other dimensions available upon request.
|
|
|
AG1-VC BUTTERFLY VALVE
ANGODOS AG1-VC
ANGODOS AG1-VC is a full bore butterfly valve with flanged body
ANGODOS AG1-VC is a full bore butterfly valve with flanged body. The valve is manufactured from a single cast iron body internally vulcanized with EPDM elastomer. The internal vulcanized elastomer gasket offers flat sealing and is the key for reliable performance. The disc is attached to the eccentric (simple or double) shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG1-VC sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic features minimizing the head loss.
PRODUCT FEATURES.
- UNE-EN 1074-1 / UNE-EN 1074-2 Product certificate.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Sealing gaskets and lateral sealing vulcanized to the body, maintenance free.
- Flange connection according to UNE-EN 1092.
- Face to face dimensions series 14 according to UNE-EN 558.
- Simple or double eccentricity.
- Low friction and maintenance free bearing system.
- Gearbox: smooth drive, IP67rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Hand-wheel or square drive with ratchet (without gearbox) available ( DN100, DN150, DN200).
- Easy installation due to the lifting attachments, lateral flat gaskets and compact size.
- Manufacture range, DN100-DN300 / PN10, PN16, PN25.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Special materials available upon request.
- Other dimensions available upon request.
|
|
|
Company.
Reliability and continuity
ANGODOS headquarters and factory are located in Madrid. The development of our products since the conception are completely made by our personnel at the ANGODOS premises.
Complete solution
We try to adapt our products to completely fit the project.
International Markets
We are currently providing service and market in different continents. Europe, Central America and the Middle East.
History
1970 Foundation of ANGODOS in Madrid specialist in valves of small diameters for the naval world.
Reliability and continuity
ANGODOS headquarters and factory are located in Madrid. The development of our products since the conception, design process , manufacturing and testing are completely made by our personnel at the ANGODOS premises.
This centralized process allows us to take decisions fast, and this is most of the times the key to offer the product that really fits in the project. ANGODOS is a private company established in 1970. As a medium-size company we have established a sound reputation for ourselves among our customers as a reliable partner during this time.
Direct contact with our clients is the essential base of our brand, in this aspect we can offer an advantage from our competitors and create long time links with our clients. Reliability: The valves manufactured by ANGODOS have shown their reliability for 50 years and most of them are still working. For many of our customers it is very important to know that we are still able to service this valves and we can supply any of the spare parts.
.
Complete solution.
Normally we receive enquiries including complex and exhaustive specifications that it is necessary to understand in order to supply the real working conditions of the valve. In this cases we try to adapt our products to completely fit the project. Another possibility is that the client show us the project and the purpose of the valve on the system so we can offer, based in our experience and knowledge, the best way to develop the project.
This customization is possible due to the centralized process of development and manufacturing of our products. We can also manufacture a high quality commodity product, normally with the best performance and short delivery time..
History.
1965 Launching of machining workshop (200 sqm) led by Antonio Gómez
working for European multinational sector.
1970 Foundation of ANGODOS in Madrid - specialist in small diameter valves for the naval world.
1985 Sealing Certificate - 70 Atm. INTA (National Institute of Aerospace Techniques).
1990 Expansion of our facilities up to 1200 sqm.
1998 Approval by the Canal de Isabel II. (The only manager of water resources
in Madrid).
2009 Valve Supply for Santander for FCC Construction Company at the request of Acuanorte, valves DN900/PN100.
2014 AENOR Product Certification according to EN 1074-1/2: 2000.
2014 CE Pressure Equipment Directive PED 2014/68/UE.
2017 Product certification for Air valve ANGODOS VAIU according to UNE-EN 1074-4. First European Brand to get air valve certificate.
Angodos is engineering and manufacturing
ANGODOS is present and we supply our products, in different countries of several continents, having satisfactorily passed operational tests and audits of our manufacturing processes in ours facilities located in Spain, as well as in the facilities of our most important suppliers, in order to obtain approval for the use of our products in the most important water companies. We are present with our designs in Europe, Central America, South America, North Africa, United Arab Emirates, Saudi Arabia, Oman, Kuwait and Qatar.IMUNEX makes our products and services expand internationally.
From 1970 ANGODOS has become a synonym of robust and reliable butterfly valves. Quality is guaranted monitoring the manufacturing process of very part, and this is possible because all the ANGODOS valves are design and manufactured entirely at ANGODOS in Spain. The advanced quality management system allows to know every detail of all the parts.