comercial@angodos.com +34 916 154 167
AXIAL TYPE CONTROL VALVE AG-AX
ANGODOS AG-AX
ANGODOS AG-AX is a flanged axial type control valve manufactured from a single cast
ANGODOS AG-AX is a flanged axial type control valve manufactured from a single cast iron body or mechanical welded body that allows reduce and control flows in a pipeline with high precision and security. The sealing system is made of EPDM vulcanized to a stainless steel ring which is the base for a tightness seal, and a stainless steel piston which will move in the same direction of the pipeline. Due to the guided piston system with quad-ring seal and the movement transmission system of rack-pinion, the piston is operated with high precision and very low torque, optimizing the operation while minimizing costs. This valve design ensures perfect flow control through annular sections. Increasing the open area while opening the valve will increase the flow. It has to be noted that the valve will work completely free of cavitation during all the operation range, this will happen due to the hydrodynamic inner design which avoid the formation of low pressures zones and thus the formation of the cavitation bubbles.
PRODUCT FEATURES.
- High precision control of flows and pressures.
- Streamlined design, minimizes head loss and optimizes flow.
- Low maintenance required due to robust, simple and compact design. Easy installation
- Free of cavitation.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Long lifetime elastomer system and easy replaceable. Bi-directional bubble tight sealing.
- Flat lateral gaskets included, body embedded for easy installation (optional)
- Flange connection according to UNE-EN 1092.
- Low friction and maintenance free bearing system made of PTFE.
- Rack-pinion movement transmission system ensures high precision while low torque is required .
- Gearbox: smooth drive, IP67rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Wide manufacture range, DN100-DN1000 / PN10, PN16, PN25 and PN40.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Other sizes available upon request.
|
|
|
AG3 BUTTERFLY VALVE
ANGODOS AG3
ANGODOS AG3 s a full bore butterfly valve with wafer body
ANGODOS AG3 s a full bore butterfly valve with wafer body. The valve is manufactured from a single cast iron body internally vulcanized with EPDM elastomer. The internal vulcanized elastomer gasket offers conical sealing system and is the key for reliable performance. The disc is attached to the eccentric shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG3 sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic features minimizing the head loss.
PRODUCT FEATURES.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Sealing gaskets and lateral sealing vulcanized to the body, maintenance free.
- Wafer connection according to UNE-EN 1092-2
- Face to face dimensions series 20 according to UNE-EN 558.
- Simple eccentricity.
- Low friction and maintenance free bearing system.
- Gearbox: smooth drive, IP67rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Hand-wheel or square drive with ratchet (without gearbox) available.
- Hydraulic or pneumatic upon request.
- Easy installation.
- Manufacture range, DN40-DN350 / PN10, PN16, PN25.
- Optimum performance in water systems up to 65ºC.
- Vacuum allowed up to 1 torr.
- Special materials available upon request.
- Other dimensions available upon request.
|
|
|
TRIPLE FUNCTION AIR VALVE VAIU
ANGODOS VAIU
ANGODOS VAIU is an innovative full bore and triple function air valve
ANGODOS VAIU is an innovative full bore and triple function air valve. Made with a single chamber body, it discharges air during pipeline filling, allows the adduction of large volumes of air during draining or pipeline bursts and can evacuate air pockets during working condition. The design allows a smooth passage for air flow, maximizing the air flow rate, due to aerodynamic inner lines and full bore. The innovative venting system allows an automatic air release during working condition, maximizing the piping system capacity. Optionally anti-slam system or inflow system can be fitted to the valve.
PRODUCT FEATURES.
- Product certificate according to UNE-EN 1074-4.
- Full bore with aerodynamic, compact and single chamber design.
- High flow rate vent during air discharge, adduction and air purge.
- High air velocities do not close the valve during the filling process.
- Variable air nozzle size according to the pipeline.
- Double guided float system to ensure the effectiveness of the sealing system minimizing axial displacement.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Designed in compliance with AWWA C-512.
- Anti-water hammer protection system (optional).
- Air inflow prevention system (optional).
- Insect screen.
- Vulcanized elastomer.
- Flange connection according to UNE-EN 1092 or ASME B16.5-2003.
- Threaded hole (¼ "W) for pressure tap or valve draining for maintenance. (standard delivered with plugging).
- Air performance estimated using an advance CFD system (Computational Fluid Dynamics), validated using a test bench.
- Easy disassembly for cleaning and maintenance.
- Optimum performance in clean water systems up to 65ºC.
- Easy installation due to the lifting attachments included.
- Wide standard range, DN50 to DN200 / PN10, PN16, PN25 and PN40.
- Special size up to DN300 / PN64 available upon request.
- Special materials available upon request.
- Sea water available.
|
|
|
AG1 BUTTERFLY VALVE
ANGODOS AG1
ANGODOS AG1 is a full bore butterfly valve with flanged body
ANGODOS AG1 is a full bore butterfly valve with flanged body. The valve is manufactured from a single cast iron body (up to DN1000) or mechanical welded body(from DN700 ti DN3000) The sealing gasket is the key for reliable sealing performance and it’s placed in the body. The disc is attached to the eccentric (simple or double) shaft bearing assuring an uniform seat and avoiding critical leaking by pressure discontinuities at the sealing area. In this way ANGODOS AG1 sealing system assures perfect sealing under the most demanding conditions. Full bore and hydrodynamic internal design provides outstanding hydrodynamic features minimizing the head loss.
PRODUCT FEATURES.
- Full bore.
- Minimum head loss.
- Low maintenance due to robust, simple and compact design.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Easy elastomers replacement.
- Flat lateral gaskets included, body embedded for easy installation (optional).
- Flange connection according to UNE-EN 1092/ ANSI
- Face to face dimensions series 13,14 and 16 according to UNE-EN 558.
- Simple or double eccentricity.
- Low friction and maintenance free bearing system.
- Locking system on the shaft, no need to cut off the fluid flow for gearbox maintenance works (optional).
- Gearbox: smooth drive, IP67 rating, standard motor connection, self-locking, adjustable stop, position indicator.
- Easy installation due to the lifting attachments and compact size.
- Wide manufacture range from DN200 to DN3000 / PN10, PN16, PN25, PN40, PN64, and PN100.
- Optimum performance in clean water and reused water systems up to 60ºC.
- Special materials available upon request.
- Other dimensions available upon request.
- Sea water available.
|
|
|
TRIPLE FUNCTION AIR VALVE VAIU-VB
ANGODOS VAIU-VB
ANGODOS VAIU-VB is an innovative full bore and triple function + vacuum breaker air valve.
ANGODOS VAIU-VB is an innovative full bore and triple function + vacuum breaker air valve. Made with a single chamber body, it discharges air during pipeline filling, evacuate air pockets during working condition, and the vacuum breaker system allows the adduction of large volumes of air during draining or pipeline bursts at preset differential pressure values. The design allows a smooth passage for air flow, maximizing the air flow rate, due to aerodynamic inner lines and full bore. The innovative venting system allows an automatic air release during working condition, maximizing the piping system capacity. Optionally anti-slam system or inflow system can be fitted to the valve.
PRODUCT FEATURES.
- Exclusive design, compact, no need to use a valve cluster.
- Vacuum breaker system opens in response to a 0,25 psi vacuum. (other vacuum values upon request)
- Product certificate according to UNE-EN 1074-4 (base model).
- Full bore with aerodynamic, compact and single chamber design.
- High flow rate vent during air discharge, adduction and air purge.
- High air velocities do not close the valve during the filling process.
- Variable air nozzle size according to the pipeline.
- Double guided float system to ensure the effectiveness of the sealing system minimizing axial displacement.
- Made with top quality materials, certified for drinking water and highly corrosion resistant.
- Designed in compliance with AWWA C-512.
- Slow closing system (optional)
- Insect screen.
- Vulcanized elastomers.
- Flange connection according to UNE-EN 1092 or ASME B16.5-2003.
- Threaded hole (¼ "W) for pressure tap or valve draining for maintenance. (standard delivered with plugging).
- Air performance estimated using an advance CFD system (Computational Fluid Dynamics), validated using a test bench.
- Easy disassembly for cleaning and maintenance.
- Optimum performance in clean water systems up to 65ºC.
- Easy installation due to the lifting attachments included.
- Wide standard range, DN50 to DN500 / PN10, PN16, PN25 and PN40.
- Special materials available upon request.
- Sea water available.
|
|
|
Angodos is engineering and manufacturing
ANGODOS is present and we supply our products, in different countries of several continents, having satisfactorily passed operational tests and audits of our manufacturing processes in ours facilities located in Spain, as well as in the facilities of our most important suppliers, in order to obtain approval for the use of our products in the most important water companies. We are present with our designs in Europe, Central America, South America, North Africa, United Arab Emirates, Saudi Arabia, Oman, Kuwait and Qatar.IMUNEX makes our products and services expand internationally.
From 1970 ANGODOS has become a synonym of robust and reliable butterfly valves. Quality is guaranted monitoring the manufacturing process of very part, and this is possible because all the ANGODOS valves are design and manufactured entirely at ANGODOS in Spain. The advanced quality management system allows to know every detail of all the parts.